Find out how to take your measurements for our made to measure service.
Measuring for Curtains
Measuring the width
Your curtain pole or track should be installed before you start your measurement.
Measure the width of your track from end to end, or the width of your pole between the decorative finials (not the width of the window!)
Measuring the drop
Depending on how long you want your curtains, you should measure from the top start point (see below) down to either the sill + 1cm, below the sill + 15cm, or to the floor + 1cm.
We recommend measuring the drop in 3 separate places across the width and choosing the longest of these measurements.
Pencil pleat
Measure the drop from the pole ring fixture to your finished length.
Triple and Double Pinch Pleat
Measure from the pole ring fixture to your required length.
Tab and Eyelet
Measure from the top of the pole to your required bottom hem position.
If ordering curtains with an eyelet heading type, please let us know the diameter of your curtain pole.
Measuring for Blinds
To fit inside the Window Reveal
1. Measure the length from the top of the reveal to the sill in several places as your window may be uneven.
2. Measure the width of the reveal at its narrowest point to ensure that blind can move freely.
3. Let us know which side you want a mechanism for your blind.
To fit outside the Window Reveal
1. Measure the length between the top of the blind and the hem position.
The top of the blind usually looks best at 10cm above the reveal and fall 5-15cm below the sill (or to the sill
if the sill projects).
2. Measure width beyond the reveal, then add at least 5cm to each side.
3. Let us know which side you want a mechanism for your blind.
